Filter By:
Accessories / Parts

$39.95
Thule's Accessory Strap Kit is a set of four rubberized, replaceable, ladder-style straps for use with many of Thule's bike racks and anti-sway cradles.

$29.95
An adapter to enable safe transport of bikes with carbon frames.
Features
- The fixation pressure is distributed over a large surface area to minimize risk of frame damages
- It fits all types of frame geometries and is easily adjustable with no loose parts
- The adapter has a soft TPE rubber liner to avoid scratching the bike frame
- Only to be used with Thule bike racks with a torque limiter knob (e.g. Thule ProRide 598003, Thule EasyFold, Thule DoubleTrack 9054, Thule Raceway 9003PRO)

$99.95
This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans.
Features
- Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT
- Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection

$29.95
A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes.
- Fits Thule EasyFold XT bike racks

$79.95
With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.

$89.95
Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.

$39.99
Thule's No-Sway Cages stabilize and prevent bike-to-bike contact on your hitch-mounted rack. They're only compatible with Thule's T3 cradles. You get 2 per pack (enough for 2 bikes).

$89.95
Install or replace all lock cylinders on your Thule products and use the same key for all.
- Replace the locks in your Thule product in a few easy steps
- Including grip-friendly Thule Comfort key
- Set of 4 locks, all using the same key

$109.95
Install or replace all lock cylinders on your Thule products and use the same key for all.
- Replace the locks in your Thule product in a few easy steps
- Including grip-friendly Thule Comfort key
- Set of 6 locks, all using the same key

$34.95
Thule's Passive Lock Strap provides added security by locking your bicycle rack to your vehicle. Two steel cables enclosed in nylon form a strong durable strap that won’t scratch your vehicle, bike or carrier. A round puck installs securely in trunk or hatch, preventing rack removal.

$579.95
This add-on to our premium Thule T2 Pro X platform hitch rack allows 4 bike capacity (2"/50mm receivers only).
Secure bikes quickly without frame contact with the frame-free ratcheting arm
Eliminate bike interference by adjusting side to side to create generous spacing between bike mounts
Ideal for carbon frames, mountain, downhill, ebikes and fat bikes as it fits 20 - 29” wheels and up to 3” tires without adapters
Not for use with front fenders

$649.95
This add-on to Thule's premium T2 Pro XT platform hitch rack allows 4 bike capacity (2"/50mm receivers only).
- Lock bikes to the rack with the integrated cable lock
- Eliminate bike interference by adjusting side to side to create generous spacing between bike mounts
- Secure bikes quickly without frame contact with the frame free ratcheting arm
- Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters

$39.95
- Pack includes 2 wheels straps and 2 road adaptors
- The WS2 Thule Wheel Straps have a secure ratcheting buckle with a cam tightening mechanism.

$14.95
The TC2 Thule Wheel Tray End Caps are compatible with the following Thule Wheel Trays: Thule 594 Sidearm, 594XT Sidearm, Thule 599XTR Big Mouth, Thule 589 Velo Vise, Thule 590 V2, Thule 590R V2 Recumbent, Thule 591 Long Tray Classic, Thule 517 Peloton, and the Thule 518 Echelon.
- Sold as a set of two
- Replacement parts for broken or lost end caps

$67.99
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

$21.59
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

$59.99
If you have a full-suspension bike, a small bike or any bike without a traditional top tube, you need Evo's Top Tube Adapter to attach your bike to your rack. The vinyl-coated clamp protects your bike's finish, and is coated with a rust-free powder coat. It fits up to 44mm headsets and up to 38mm seat post diameters.

$67.99
- Updated design, for use with all Saris racks where bikes are secured by the top tube
- Bridges the gap from stem to seat tube, creating a virtual top tube
- Useful on ladies and specialty frames

$24.99
Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack
- Provides a clean and sleek look for your Saris Bones rack
- Upgrade your current Bones or Bones EX rack (pre-2022)
- Compatible with: Bones or Bones EX racks
- Not compatible to use with any Bones Hitch racks or SUPERBones

$64.99
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

$32.99
Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks
- Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges.
- Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps
- Quick and easy to install and attach to your Saris Trunk Rack.
- Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks.
- Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.

$24.99
Increase rack stability for a smoother ride, this clamp system securely tightens hitch rack to receiver.
- Adds extra security to bike racks and hitch devices
- Eliminates rattling and wobbling
- Compatible with 2" receivers

$19.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

$59.99
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.

$54.99
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

$259.99
The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs.
- Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Hitch Base and a wide assortment of Bike carriers and other gear carrying accessories.
- MHS Universal Hitch Base fits 1.25" and 2" receivers
- Base accommodates 1 bike tray + 1 Add-On Bike Tray, sold separately
- Convenient rear of vehicle access with tilting base activated with easy to use outboard handle
- Compact storage on vehicle as base tilts up when not in use
- Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection.
- Includes hitch lock plus additional 2 lock cores for use with MHS Accessories
- Fully assembled and easy to install on vehicle

$259.99
The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs.
- Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Base unit and a wide assortment of Bike carriers and other gear carrying accessories.
- MHS Hitch Base fits 2" receivers
- Base accommodates 2 bike trays + 1 Add-On Bike Tray, sold separately
- Convenient rear of vehicle access with tilting base activated with easy to use outboard handle
- Compact storage on vehicle as base tilts up when not in use
- Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection.
- Includes hitch lock plus additional 3 lock cores for use with MHS Accessories
- Fully assembled and easy to install on vehicle

$64.99
Easy to move rack to/from vehicle without any lifting, this wheeled dollie attaches quickly t- most 2" receiver compatible racks
- Wheels ensure smooth and effortless transport of rack to/from vehicle without any lifting
- Connects to 2" stinger with simple pin
- Works with most Saris hitch racks and other racks that bolt t- vehicle receiver
- Easy to remove

$234.99
An RV compatible 2" hitch base for use with any SuperClamp 2-bike hitch rack.
- Make your existing SuperClamp 2-bike hitch rack RV compatible (Class A, B, & C Motorhome).
- A 2-inch base compatible with all SuperClamp 2-bike hitch racks (4025, 4025C, 4025F, 4026F).
- For use with 2" receivers only.
- Hitch pin and hardware sold separately.
Page 1 of 2
Next page