Skins

mountainFLOW’s rub-on skin wax helps prevent icing on climbing skins (which is the worst!) SIZE: 2 OZ Plant-Based + Biodegradable 0% Petroleum Can apply in the field

- New optimized Smart Glue technology combines trusted hot melt adhesion with facilitated handling forces. - A 2-layer Fiber Seal construction without cotton works water repelling, prevents glopping, and lets the skin dry quicker. - The skins are laser-cut for a precise and robust outline. - The 70/30 Mohair mix is the perfect combination of gliding and tracking.

Völkl's Smart Glue skins are pre-cut and ready to use out of the package. A new, easier-handling adhesive makes them much easier to manage when transitioning from uphill to downhill modes.

Völkl's Smart Glue skins are pre-cut and ready to use out of the package. A new, easier-handling adhesive makes them much easier to manage when transitioning from uphill to downhill modes. - New optimized Smart Glue technology combines trusted hot-melt adhesion with facilitated handling forces - A 2-layer Fiber Seal construction without cotton helps with water repelling, prevents glopping, and lets the skin dry quicker - The skins are laser-cut for a precise and robust outline - The 70/30 Mohair mix is the perfect combination for gliding and tracking SMART SKINCLIP The newly developed Smart Skinclip system allows the ski tourer to decide for himself, depending on the situation, in which direction he should pull the skin on and off. REDUCED MOISTURE ABSORPTION Our skins no longer need a cotton base layer and the plush is stuck directly to the adhesive. This means the skins take longer to become saturated as there is no cotton layer to absorb moisture. There’s no need to worry if you’re heading on a tour that starts in wet snow in a warmer valley location before continuing in far colder snow as you gain altitude! As the skins absorb less water, they also freeze far less. ADHESIVE TECHNOLOGY Enhanced adhesive technology for easier handling! Thanks to the optimised Smart Glue technology, the skins stick securely to the ski bases but can also be removed from them more easily. The adhesive surfaces are easier to separate after being transported (e.g. in a skin bag), largely dispensing with the need for protective netting! LASER CUT Precise laser cuts enable a perfect match between the width of the skins and skis. A precise laser cut makes the skin width the perfect fit for the respective skis. The cut edge is so robust that the skins fray far less. BEST COMBINATION OF GLIDE & GRIP Our 70/30 mohair/nylon mix skin allows the skis to glide forward with little effort and provides optimum grip under load to enable you to calmly and confidently take your next step. OPTIMUM FLEXIBILITY Our Smart Skin Clip System provides complete freedom when attaching and removing skins: this can be done from the tip to the tail of the skis or vice-versa as desired thanks to clips at both ends of the skins.

- New optimized Smart Glue technology combines trusted hot melt adhesion with facilitated handling forces. - A 2-layer Fiber Seal construction without cotton works water-repelling, prevents flopping, and lets the skin dry quicker. - The skins are laser cut for a precise and robust outline. - The 70/30 Mohair mix is the perfect combination of gliding and tracking. - Smart-Clip System allows the skier to put on or pull off the skin in both directions, depending on the situation.

Pre-fitted, lightweight and reliable skins for MTN 6 ski.

Pre-fitted, lightweight and reliable skins for QST 92 ski.

Pre-fitted, lightweight and reliable skins for QST 98 ski.

Ideal for partial or total renewal of glue with all temperature warranty. For one pair of skins.

The Climb 2.0 is the classical proved POMOCA mix skin, developed for every skier. Lightweight and with an accurate design, it will always help you to reach your goals. GLIDE 235 kcal/h GRIP 46 g/cm2 WEIGHT 1,100.000 g/m2 206 g / skin (110 mm x 170 cm)

The Climb Pro S-Glide is the best gliding mix skin ever, the best anti-glopping and the most resistant one. This is the skin for professionals of the mountain for several days' tours. GLIDE 213 kcal/h GRIP 52 g/cm2 WEIGHT 1,200.000 g/m2 224 g / skin (110 mm x 170 cm)

Sponge-on waterproofing for Ski Skins Repels water, stops saturation, reduces kick, improves glide

Blizzard's precut skins are tailored specifically for our Zero G Backcountry Touring collection. No longer do you have to cut skins for these skis. Blizzard has done the cutting and specifications for you, which mean these will fit each Zero G ski perfectly. Adding to the precise fit, each Zero G ski utilizes unique Pomoca technologies. Physicists and chemists work hand-in-hand with textile engineers and athletes to develop better material contact surfaces and thus push the effectiveness of climbing skins to the highest level. Pomoca technologies, the lightest in the market, create perfect skin-to-ski, skin-to-snow stick, and solid tip and tail fixation. Blizzard's precut skins combine with Blizzard's Zero G skis to make the lightest ski and skin package on the market

Blizzard's precut skins are tailored specifically for our Zero G Backcountry Touring collection. No longer do you have to cut skins for these skis. Blizzard has done the cutting and specifications for you, which mean these will fit each Zero G ski perfectly. Adding to the precise fit, each Zero G ski utilizes unique Pomoca technologies. Physicists and chemists work hand-in-hand with textile engineers and athletes to develop better material contact surfaces and thus push the effectiveness of climbing skins to the highest level. Pomoca technologies, the lightest in the market, create perfect skin-to-ski, skin-to-snow stick, and solid tip and tail fixation. Blizzard's precut skins combine with Blizzard's Zero G skis to make the lightest ski and skin package on the market.

Includes all the hardware necessary to install a BD-style, rigid tip attachment system to your climbing skins. Adjustable Tip Loop Fits a Wide Range of Ski Tip Shapes

A replacement Dynex and aluminum tip loop kit.

Smooth the plush, increase the glide—use Glop Stopper Wax on your skin fabric to keep waterlogged snow from sticking and weighing down your skins. A must for spring tours or temperature inversions. Glop Stopper Wax is a must for spring tours or temperature inversions.

Keep your skin glue fresh and clean by sandwiching this synthetic mesh panel between the sticky sides of your skis

Some of the most reliable, durable, determined skin glue ever made, Black Diamond Gold Label Adhesive comes in a 2.8 fluid ounce tube for easy application. For touch ups and Increasing the longevity of your skins

These are high quality prefit skins for each ski in our Atomic Backland series, so there’s no additional trimming required. They’re made from a 70% Mohair mix for a really strong grip as you climb, and they’re very durable and long lasting. - Prefit Cut - 70% Mohair Mix

These Atomic Hybrid Skins perfectly match our Atomic Backland 95 skis. The skins fit our 185cm-length Backlands perfectly – and fit to the 177cm and 169cm length skis with a simple, single cut. They use 100% Mohair for a strong grip and smooth glide and feature easy-to-handle Hybrid Glue that keeps your skins from sticking together and renews with a quick wash with a Hybrid cleaning set. - Prefit Cut - 100% Race Mohair - Hybrid Glue