Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Bindings

Marker Alpinist 10 Alpine Touring Bindings
$459.95
The ultra-light and durable touring pin binding for high alpine challenges with DIN settings from 4 to 10. This ultra-light pin binding (245 g w/o brake) offers active length compensation when the ski flexes and an impressive power transfer downhill due to a 38 mm drill pattern. A carbon-reinforced toe provides great stiffness and comes with anti-ice pads and integrated elastomers for easy stepping in. The heel features a climbing aid with 0°, 5° and 9° angles and can be quickly and easily switched between hike and ski mode. Another useful feature is that the Alpinist allows a +/- 7.5 mm heel adjustment to suit various sole/boot lengths. Weight: 490g / 1.08lbs DIN: 4.0-10.0
Marker Baron EPF 13
$449.99
The Baron earned its royal stripes long ago as a favorite amongst big mountain, backcountry enthusiasts. Extended Power Frame (EPF), with its extra-wide connection to the ski, gives it the structure needed to power today's wider skis through any snow conditions, whether inside or outside the resort. Frame binding technology allows skiers the versatility to go touring in boots without tech inserts. ANTI ICE RAIL - Use the metal rail to scratch off ice and snow below your boot sole. HOLLOW TECH - Our fiber-reinforced frame base plate provides impressive riding stability and is yet very light due to the gas injected hollow construction. EPF - EXTENDED POWER FRAME - The power booster. The power frame delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm. CLIMBING AIDS FRAME TOUR - The climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow more comfortable hiking. TRIPLE PIVOT ELITE TOE - The toe construction with DIN/ISO up to Z 18 allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5°, it provides higher energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance. SOLE.ID - Height-adjustable gliding plate to be compatible with alpine (ISO 5355), touring (ISO 9523), and GripWalk soles. Easy to adjust: Pozi screw at the front to adjust the height of the gliding plate. - Small: 264 - 327mm - Large: 304 - 367mm
Marker Duke PT 12 Alpine Touring Ski Bindings
$849.99
For skiers looking for the ultimate versatility in their setup, with uncompromising big mountain performance plus the ability to take advantage of true Pin Tech climbing functionality, the Duke PT ushers in a new era. Marker sets yet another milestone, adding to the Royal Family heritage with the introduction of this hybrid freeride binding for the 2020-21 season. The biggest highlight of this new binding is the innovative Quad-Lock Ride & Hike toe. In ride mode, it provides uncompromising downhill performance with full safety release properties from DIN 4-12. Switching the binding to hiking mode is simply a matter of unlocking the upper part of the toe piece and rotating it forward. Pin binding technology is integrated into the base plate underneath the toe housing and operates in much the same way as Marker's KingPin and Alpinist models. In uphill mode, you have the option of saving 250 grams weight per foot by removing the toe housing sections and stowing them in your backpack. To switch to downhill mode, the toe housing clicks back onto the base plate. It locks back into place thanks to Auto Quad-Lock technology, just by stepping into the binding, without any extra action required by the skier. Another advantage, the Hollow Linkage heelpiece gives the skier the security and power transmission as our Squire freeride binding on the way down. The Duke PT also features SOLE.ID technology, just like other products in the Royal Family. This makes the binding compatible with all boot sole types falling under the Alpine (ISO 5355), Touring (ISO 9523), or GripWalk (ISO 9523) norms. ANTI-ICE RAIL - Use the metal rail to scratch off ice and snow below your boot sole. LOCK & WALK BRAKE - Including neutral walking mode and 10° climbing aid. AUTO QUAD LOCK - Toe part locks itself at 4 different points automatically when stepping into the binding. RIDE & HIKE TOE - For great Royal Family downhill performance and release function combined with pin-technology for strong uphill performance; DIN 6 – 16 Convertible toe: - Save 300g per foot for the uphill. SOLE.ID - Height-adjustable gliding plate to be compatible with alpine (ISO 5355), touring (ISO 9523), and GripWalk soles. Easy to adjust: Pozi screw at the front to adjust the height of the gliding plate. HOLLOW LINKAGE HEEL - The Hollow Linkage Heel was designed to optimize retention for all common types of alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The very robust construction is best suited for the most strenuous requirements.
Marker Duke PT 16 Alpine Touring Ski Bindings
$899.99
For skiers looking for the ultimate versatility in their setup, with uncompromising big mountain performance plus the ability to take advantage of true Pin Tech climbing functionality, the Duke PT ushers in a new era. Marker sets yet another milestone, adding to the Royal Family heritage with the introduction of this hybrid freeride binding for the 2020-21 season. The biggest highlight of this new binding is the innovative Quad-Lock Ride & Hike toe. In ride mode, it provides uncompromising downhill performance with full safety release properties up to DIN 16. Switching the binding to hiking mode is simply a matter of unlocking the upper part of the toe piece and rotating it forward. Pin binding technology is integrated into the base plate underneath the toe housing and operates in much the same way as Marker's KingPin and Alpinist models. In uphill mode, you have the option of saving 250 grams weight per foot by removing the toe housing sections and stowing them in your backpack. To switch to downhill mode, the toe housing clicks back onto the base plate. It locks back into place thanks to Auto Quad-Lock technology, just by stepping into the binding, without any extra action required by the skier. Another huge advantage, the Inter Pivot 3 heel piece is the same as that of the new Jester, giving you the security and power transmission of our top of the line Freeskiing bindings while skiing down. The Duke PT also features SOLE.ID technology, just like other products in the Royal Family. This makes the binding compatible with all boot sole types falling under the Alpine (ISO 5355), Touring (ISO 9523), or GripWalk (ISO 9523) norms.
Marker Duke PT Ski Crampon
$119.95
Ski Crampons designed to fit the Marker Duke PT alpine touring binding. 105 = Ski width 90-105 mm 125 = Ski width 105-125 mm
Marker Kingpin 10 Alpine Touring Ski Bindings
$699.99
The innovative Kingpin has earned its stripes as the performance standard in PinTech AT binding technology. The Kingpin's unique toe and heel pieces offer a unique blend of characteristics that seek to optimize both climbing and descending. The toe piece is updated with the dual spring and higher pivot point setup from the Alpinist. Ease of use, and best of all, unbeatable power transmission while on the descent mean that you've never had a day in the backcountry like the ones you'll have on the Kingpin! Weight (Pair) : 1.34kg / 2.95lbs DIN: 5.0 - 10.0
Marker Kingpin 13 Alpine Touring Ski Bindings
$764.99
The innovative Kingpin has earned its stripes as the performance standard in PinTech AT binding technology. The Kingpin's unique toe and heel pieces offer a unique blend of characteristics that seek to optimize both climbing and descending. The toe piece is updated with the dual spring and higher pivot point setup from the Alpinist. Ease of use, and best of all, unbeatable power transmission while on the descent mean that you've never had a day in the backcountry like the ones you'll have on the Kingpin! Weight: 1.36kg / 3.00lbs (pair) Din: 6.0 - 13.0
Marker Kingpin M-Werks 12 Alpine Touring Ski Bindings
$824.95
This state-of-the-art touring binding with a DIN setting up to 12 weighs only 620g per piece (including brake) and provides all the stunning Kingpin performance features like XXL power transmitter and ergonomic climbing aids. Additionally the M-Werks edition comes with carbon-reinforced toe, heel, and sliding plate for light and powerful skiing experience. The featherfin-shaped ski/walk mode lever offers easy handling at a minimum weight. - Category: Touring Pin - Brake width: 75-100mm - Din/ISO Range: 5.0 - 12.0 - Boot type: Touring boots - Recom. Skier's Weight: <120kg - Stand height w/o ski: 21.5mm - Toe System: Carbon-reinforced Pin Toe - Step-in Heel: Kingpin - Heel adjustment range: 25mm - Walking modes :0°, 7°, 13° - Weight: 630g
Marker Kingpin/Alpinist Ski Crampons
$89.95
Highly functional crampons designed for Marker Kingpin and Alpinist pin bindings. They are specially light and are easily slided in sideways of the toe piece without having to step out of the binding. They provide optimal grip on icy or hard-packed underground and produce hardly any friction on the feed-foreward. There are three differend widths at choice: 90, 105 and 120mm. Weight: 95g (105mm size)
Marker Marker Alpinist Brake
$79.99
The optionally available brake comes in three different sizes for various ski widths (90 / 105 / 115 mm). It automatically locks in walking mode with the very first step and reactivates when switching back into riding mode. Their pronounced retraction brings the arms of the brake very close to the ski.
Page 1 of 1